See privacy cavity sliding locks at top of page
Scroll down to see passage flush pulls/end pulls (round and radius edged)
55/B- BIA Flush pull set with edge pull and privacy mortice lock
White finish
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
Fingerpull dia. 25mm, 23mm deep
55/B- ANT Flush pull set with edge pull and privacy mortice lock
Anthracite finish
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
Fingerpull dia. 25mm, 23mm deep
55/B- NER Flush pull set with edge pull and privacy mortice lock
Matte black finish
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
Fingerpull dia. 25mm, 23mm deep
55/B- OSO Flush pull set with edge pull and privacy mortice lock
Satin brass finish
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
Fingerpull dia. 25mm, 23mm deep
55/B- CRO Flush pull set with edge pull and privacy mortice lock
Polished chrome finish
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
Fingerpull dia. 25mm, 23mm deep
55/B- OTL Flush pull set with edge pull and privacy mortice lock
Polished brass finish
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
Fingerpull dia. 25mm, 23mm deep
55/B- CSA Flush pull set with edge pull and privacy mortice lock
Satin chrome finish
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
Fingerpull dia. 25mm, 23mm deep
55/B- NIS Flush pull set with edge pull and privacy mortice lock
Satin nickel finish
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
Fingerpull dia. 25mm, 23mm deep
54/A- OSO Passage flush pulls (pair) WITH end pull
54 - OSO Passage flush pulls (pair) WITHOUT end pull
56 - OSO - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- BIA Passage flush pulls (pair) WITH end pull
54 - BIA Passage flush pulls (pair) WITHOUT end pull
56 - BIA- End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- NER Passage flush pulls (pair) WITH end pull
54 - NER Passage flush pulls (pair) WITHOUT end pull
56 - NER - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- NIS Passage flush pulls (pair) WITH end pull
54 - NIS Passage flush pulls (pair) WITHOUT end pull
56 - NIS - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- CRO Passage flush pulls (pair) WITH end pull
54 - CRO Passage flush pulls (pair) WITHOUT end pull
56 - CRO - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- ANT Passage flush pulls (pair) WITH end pull
54 - ANT Passage flush pulls (pair) WITHOUT end pull
56 - ANT - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- OTL Passage flush pulls (pair) WITH end pull
54 - OTL Passage flush pulls (pair) WITHOUT end pull
56 - OTL - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
58-CRO Flush pulls (Pair)
Polished chrome finish
125mm long, 40mm wide, inset is 85x22mm.
58-BIA Flush pulls (Pair)
White finish
125mm long, 40mm wide, inset is 85x22mm.
58-OSO Flush pulls (Pair)
Satin brass finish
125mm long, 40mm wide, inset is 85x22mm.
58-NER Flush pulls (Pair)
Matte black finish
125mm long, 40mm wide, inset is 85x22mm.
58-CSA Flush pulls (Pair)
Satin chrome finish
125mm long, 40mm wide, inset is 85x22mm.
58-NIS Flush pulls (Pair)
Satin nickel finish
125mm long, 40mm wide, inset is 85x22mm.
58-OTL Flush pulls (Pair)
Polished brass finish
125mm long, 40mm wide, inset is 85x22mm.
54/A- NIS Passage flush pulls (pair) WITH end pull
54 - NIS Passage flush pulls (pair) WITHOUT end pull
56 - NIS - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- OSO Passage flush pulls (pair) WITH end pull
54 - OSO Passage flush pulls (pair) WITHOUT end pull
56 - OSO - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- BIA Passage flush pulls (pair) WITH end pull
54 - BIA Passage flush pulls (pair) WITHOUT end pull
56 - BIA- End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- NER Passage flush pulls (pair) WITH end pull
54 - NER Passage flush pulls (pair) WITHOUT end pull
56 - NER - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- CRO Passage flush pulls (pair) WITH end pull
54 - CRO Passage flush pulls (pair) WITHOUT end pull
56 - CRO - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- ANT Passage flush pulls (pair) WITH end pull
54 - ANT Passage flush pulls (pair) WITHOUT end pull
56 - ANT - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
54/A- OTL Passage flush pulls (pair) WITH end pull
54 - OTL Passage flush pulls (pair) WITHOUT end pull
56 - OTL - End pull only
Flush pulls 57mm dia. (internal 44mm dia.), 5.5mm deep
End pull dia. 25mm, 23mm deep
58-CRO Flush pulls (Pair)
Polished chrome finish
125mm long, 40mm wide, inset is 85x22mm.
58-BIA Flush pulls (Pair)
White finish
125mm long, 40mm wide, inset is 85x22mm.
58-OSO Flush pulls (Pair)
Satin brass finish
125mm long, 40mm wide, inset is 85x22mm.
58-NER Flush pulls (Pair)
Matte black finish
125mm long, 40mm wide, inset is 85x22mm.
58-CSA Flush pulls (Pair)
Satin chrome finish
125mm long, 40mm wide, inset is 85x22mm.
58-NIS Flush pulls (Pair)
Satin nickel finish
125mm long, 40mm wide, inset is 85x22mm.
58-OTL Flush pulls (Pair)
Polished brass finish
125mm long, 40mm wide, inset is 85x22mm.
C-PE-MP-OZI-RH-E85-OSO (right hand) - Pictured above
C-PE-MP-OZI-LH-E85-OSO (left hand)
Petra lever, with euro cylinder, internal privacy snib locking, with OZI-1 mortice lock.
Satin brass finish
PE-MP-OZI-RH-E85-NER (right hand) - Pictured above
PE-MP-OZI-LH-E85-NER (left hand)
Petra lever, with euro cylinder, internal privacy snib locking, suitable to be installed with OZI-3 mortice lock.
matte black finish
TS-MP-OZI-RH-E85-OSO (right hand) - Pictured above
TS-MP-OZI-LH-E85-OSO (left hand)
Tosca lever, with euro cylinder, internal privacy snib locking, suitable for OZI-1 mortice lock.
Satin brass finish
TS-MP-OZI-RH-E85-ANT (right hand) - Pictured above
TS-MP-OZI-LH-E85-ANT (left hand)
Tosca lever, with euro cylinder, internal privacy snib locking, suitable for OZI-1 mortice lock.
Anthracite finish
TS-MP-OZI-RH-E85-NER (right hand) - Pictured above
TS-MP-OZI-LH-E85-NER (left hand)
Petra lever, with euro cylinder, internal privacy snib locking, suitable for OZI-1 mortice lock.
Matte black finish
TS-MP-OZI-RH-E85-NIS (right hand) - Pictured above
TS-MP-OZI-LH-E85-NIS (left hand)
Petra lever, with euro cylinder, internal privacy snib locking, suitable for OZI-1 mortice lock.
Satin nickel finish
RT-MP-OZI-RH-E85-OSO (right hand) - Pictured above
RT-MP-OZI-LH-E85-OSO (left hand)
Ratio lever, with euro cylinder, internal privacy snib locking, suitable for OZI-1 mortice lock.
Satin brass finish
Model pictured is the Erica lever, with euro cylinder, internal privacy snib
locking, CRO polished chrome finish
Model pictured is the Erica lever, euro cylinder cutout with 85mm hole centres
Satin brass finish
Model pictured is the Erica lever, euro cylinder cutout with 85mm hole centres
polished chrome finish
Model pictured is the Tosca lever, on Patricia style longplate
Privacy function snib turn, CSA satin chrome finish
Model pictured is the Lilla lever, with passage
function (Blank plate, no keyhole), CSA satin chrome finish
LM40-CSA satin chrome
50mm diameter
Privacy bolt not included.
LM40-OSO satin brass
50mm diameter
Privacy bolt not included.
LM40-NER matte black
50mm diameter
Privacy bolt not included.
LM40-OTL polished brass
50mm diameter
Privacy bolt not included.
LM40-NIS satin nickel
50mm diameter
Privacy bolt not included.
LM40-CRO polished chrome
50mm diameter
Privacy bolt not included.
A-EURO-CSA satin crhome
Sold as a pair, 50mm diameter
Suits euro key cylinder
A-EURO-NIS satin nickel
Sold as a pair, 50mm diameter
Suits euro key cylinder
A-EURO-OSO satin brass
Sold as a pair, 50mm diameter
Suits euro key cylinder
A-EURO-OTL polished brass
Sold as a pair, 50mm diameter
Suits euro key cylinder
A-EURO-NER matte black
Sold as a pair, 50mm diameter
Suits euro key cylinder
A-EURO-CRO polished chrome
Sold as a pair, 50mm diameter
Suits euro key cylinder
Available in Passage and Privacy (snib locking) models.
The products are double sprung (soft closing) and are designed to suit European levers such as Manital.
Finishes currently available for privacy sets: Stainless Steel, polished Chrome, Polished Brass, Satin Brass, Matte Black
Finishes currently available for passage sets: Stainless Steel, polished brass.
MPL-SS Privacy latch stainless steel (pictured at top)
MHDL-SS Passage latch stainless steel (pictured at bottom)
60mm backset
MPL-NER Privacy latch matte black
MHDL-NER Passage latch matte black
60mm backset
MPL-OTL Privacy latch polished brass
MHDL-OTL Passage latch polished brass
60mm backset
MPL-ANT Privacy latch anthracite
MHDL-ANT Passage latch anthracite
60mm backset
MPL-AB Privacy latch antique brass
MHDL-AB Passage latch antique brass
60mm backset
MPL-OSO Privacy latch satin brass
MHDL-OSO Passage latch satin brass
60mm backset
MTS Manital taylor spindle 8mm in thickness.
Used to convert a lever to fixed dummy function.
Applications: Non active doors, closets and robes.
Sold as each.
Fixed & revolving spindle 8mm thickness.
8 X90mm turnable section and 8 x25mm fixed section.
Applications: For doors with fixed external lever and functioning internal lever.
Sold as each.
MPS Privacy split spindle 7.6mm thickness.
Applications: For Bedroom and bathroom doors with Manital privacy sets.
Sold as each.
MNS standard spindle - 105mm (each) x 7.6mm
MNS standard spindle- 95mm (each) x 7.6mm
MNS standard spindle - 95mm (each) x 8.0mm
Applications: For internal passage doors.
Sold as each.
MNS Split spindle 95mm x 7.6mm thickness.
Applications: For locks that require each lever function to individually.
Sold as each.
MCD-58-CRO polished chrome
58mm diameter, sold as a pair.
Used to adapt a set of 50mm Manital lever backplates (rosettes) so they cover a 54mm standard hole.
MCD-58-NIS satin nickel
58mm diameter, sold as a pair.
Used to adapt a set of 50mm Manital lever backplates (rosettes) so they cover a 54mm standard hole.
MCD-58-CSA satin chrome
58mm diameter, sold as a pair
Used to adapt a set of 50mm Manital lever backplates (rosettes) so they cover a 54mm standard hole.
MCD-58-NER matte black
58mm diameter, sold as a pair
Used to adapt a set of 50mm Manital lever backplates (rosettes) so they cover a 54mm standard hole.
MCD-58-OSO satin brass
58mm diameter, sold as a pair.
Used to adapt a set of 50mm Manital lever backplates (rosettes) so they cover a 54mm standard hole.
